GOOD's upholstery spray glue is a powerful, heat-resistant, aging-resistant and cost-saving SBS based adhesive. It is widely used in the filed of upholstery furniture, high class furniture.It has the following advantages.
Fast drying, shorter processing time.
Save glue and production cost.
low odor, improve working condition.
It is used for the bonding between materials like foam, sponge, fabric, cloth, leather, board in upholstery.
Appearance: yellowish liquid
Solid Content: 30%-35%
Raw materials: SBS rubber, resin, rosin, eco-friendly solvent
Highest endurable temperature: 45-50℃
Tack Retention Time: 5-10min
The upholstery spray glue is widely applied in bonding foam, sponge, fabric, cloth, leather, board in upholstery.
1. Make sure the surface of the material is clean and without moisture, grease, dust or impurity.
2. How to spray:
Linear style: the muzzle forms a 45°angle on the surface of material and keeps a distance of 0.5m from the surface. The air pressure of the lance should be adjusted to 6~8 kg.
Sector style: keep the muzzle perpendicular to the surface of the material, then spray evenly and form a sector-like gel fog, the angle of the sector is about 45°.
3. After step 2, lay it for 1~5 min or when the glue on the material is not sticky, it can be bonded together.
Packed in iron drum.
Keep the glue in cool and dry places. Store it at 60-80°F (15-27°C) for maximum storage life. Higher temperature can reduce normal shelf life. Lower temperature can cause increased viscosity of a temporary nature.
1. The product should be tightly sealed and kept in cool and dry places between 5~40℃.
2. Keep away from fire.
3. Related emergency should be handled according to MSDS.
4. Operators should wear protective equipment. Keep the working place well ventilated.
5. There may be differences between the performance description and actual product performance, which may arise from the bonding materials, equipment, etc..
1.Rich experience in transport of chemical liquid goods.
2.Response timely with professional workable advice.
3.Provide professional technical support to help you solve the bonding problems no matter before or after sales.
4.Strict quality control is put in place to guarantee product quality conform with customers’ requirement.
5.Offer OEM service.