Introduction of synthetic rubber adhesive
GOOD’s synthetic rubber adhesive is a multi-purpose contact adhesive with strong bonding ability. It is made with up-to-date technology and equipment and has super viscidity. It has the following features.
Strong bonding strength
Wide application, all-purpose adhesive.
Medium tack time, flexible in constructional operation.
Application of synthetic rubber adhesive
Suitable for industries such as architectural decoration, furniture manufacture, automobile, advertising, shoes, leather, rubber and home decoration. It can be widely used for both hard-to-contact materials like anti-firing plate, aluminum-plastic plate and PVC board, and common board like wood board, plywood, wood floor, furniture, wallpaper, polyester plywood, bamboo board, asbestos board, carpet etc.
yellow viscous liquid
Tack retention time
1. The materials to be bonded should be dry, clean and free of dust, grit, loose materials, oil or grease.
2. Using a brush or spreader, apply a thin even coating of adhesive to both of the surfaces.
3. Allow the solvent content to evaporate before bonding the materials. The time for this evaporation will depend on the temperature and humidity. On absorbent or permeable materials such as leather/chipboard, bonding may be possible within a matter of 2-3 minutes of application; on non-absorbent or non-permeable materials a minimum of 15 minutes should elapse before the surfaces are bonded.
4. Bond the materials under firm pressure.
Packing of Synthetic Rubber Adhesive