Introduction to PVC Inflatable Boat Repair Glue
HN-800W (1) is suitable for bonding soft PVC materials in repairing PVC inflatable boat, inflatable castle for children, PVC inflated toys etc. It is mainly used for fast and high-quality repair of inflatable boats made of PVC-based materials. It allows you to create an elastic, strong stitch. To increase the heat resistance and strength of the surfaces to be bonded, it is necessary to use the adhesive in a two-component mixture with hardener.
Model: HN-800W (1)
transparent viscous liquid
Tack Retention Time
Direction for Use
Find the leak point on the boat first.
Pretreatment: Clean the stains around the leak point with alcohol and wipe dry with a towel. Make sure that the leaking point is clean and dry around.
Mix the adhesive and the hardener together based on 100: 5 by weight.
Brush the adhesive on both bonding surfaces.
Dry time: lay it for 10 minutes, extend the drying time if in winter.
Bond the surfaces together; laminate it with hot wind lamination machine.
Packed in aluminum tube or iron tin. OEM service offered.
Guangdong Good Resin Technology Co., Ltd is one of the biggiest adhesive manufacturers in China and is located in the Industrial Development Zone of Sanshui District, Foshan City, Guangdong Province, with a total annual output of 200,000 tons. A large High-polymer Research Institute was established with a complete set of advanced production lines and precision instruments, GOOD specializes in producing more than 100 kinds of adhesive products, including solvent based adhesive, water based adhesive, spray adhesive, lamination adhesive, primer, cleansers, etc. Our products are widely used by shoe factories, shoe accessories factories, bag & luggage factories, furniture factories, lamination factories, door factories, automobile interior factories, etc.